ROS2 Robotic Arm Developer to Program a Six-Joint Golf Swing Trainer
The client wants a ROS2 robotic arm developer to program a six-joint arm that moves around a trainee golfer, driven from a complete control UI. This brief covers the setup, budget fit and how to bid.
- Open · checked 12 Nov 2026
- 3d Modelling
Is the budget fair? Tight if the job covers the UI, the arm program and PLC and servo integration at this budget. Looks workable only if the scope is limited to one of those parts.
What the client needs
- Program a six-joint robotic arm to perform the movements set in the control UI.
- Build a complete control UI from the attached documents.
- Connect the arm to the servo drives and PLC the client supplies, using ROS2 or a similar robotic operating system.
Skills the client asked for: 3D Modelling, Robotics, Robotic Process Automation, Automation, Robot Operating System (ROS), PLC.
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
What the project involves
The client wants a six-joint robotic arm programmed as a golf swing trainer, starting with the control equipment: good-quality Chinese servos and drives plus a PLC, with documentation available online in English.
Tasks
- Create a complete user interface per the attached documents
- Program the robotic arm to perform according to that UI
Applicant requirements
The client calls this a robotics challenge and will only accept offers from programmers very familiar with a robotic operating system such as ROS2 and with several years of experience in it.
How to win this project
- Name your ROS2 projects and years of experience, since the client accepts offers only from experienced robotic programmers.
- Ask for the attached documents, PLC model and drive details before quoting, since the build depends on them.
- Show a robotic arm project with a UI and motion control, and explain how you test safety around a person.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- Which PLC and servo drive models are supplied?
- What safety stops are needed when the arm is near a trainee?
- Is the arm hardware included, or only the control equipment?
Common questions
How much does a ROS2 robotic arm developer cost?
The client lists a budget of $250–750 USD. That may cover a focused control UI and motion program, but PLC and servo integration needs a clear scope before quoting.
What skills does a ROS2 robotic arm developer need?
The brief asks for robotic operating system experience with ROS2, plus PLC, automation and 3D modelling. Show a ROS2 project with a working robot arm.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.