Skip to content

3D Printable Spoiler Redesign Project for a Race-Car Style Wing

The client wants a 3D printable spoiler redesign project that adjusts the size and angles of an existing wing model. This brief covers keeping the proportions and mounting holes, the watertight print requirements and the rule against AI-generated mockups.

  • Open · checked 12 Nov 2026
  • 🇬🇧 United Kingdom (budget currency)
  • 3d Rendering
Budget£20–250 GBP
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? The £20-250 GBP budget looks workable for a focused edit of one existing file, and tight if the client expects several design options or a full rebuild of the wing.

What the client needs

  • Adjust the wing size and angles so the contours look fluid and true to a real race-car profile.
  • Keep the overall proportions and mounting holes unchanged.
  • Deliver a watertight, manifold STL that slices without repair.
  • Use manual CAD or modelling tools rather than AI-generated mockups.

Skills the client asked for: 3D Rendering, 3D Modelling, 3D Animation, 3D Design, 3D Printing, Blender, Fusion 360, 3D CAD.

Where to aim your bid

Low£55
Sweet spot£110
High£180

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 3 3d Rendering briefs we have written in GBP, the median budget is £500. We wrote 63 3d Rendering briefs in the last 7 days.

Remodel task

The client owns an STL of a Formula One style spoiler and wing and wants adjustments to the panels. The overall proportions of the file stay, while the size and angles of the wing change so the contours look fluid and true to a real F1 profile, as shown in a reference picture.

Technical requirements

  • Used only for 3D printing a physical piece
  • Mesh must be watertight, free of non-manifold edges and thin walls, and slice without repair in BambuLab
  • Mounting holes and proportions must not change
  • Any tool may be used (SolidWorks, Fusion 360, Blender) as long as the exported STL prints; AI-generated mockups or tools are not acceptable

Deliverables and supplied files

The client provides the original model file and reference pictures showing the desired panel and wing placement.

  • One version of the wing as a high-resolution, print-ready STL
  • Native design file (STEP or equivalent) for later changes to mounting points

How to win this project

  1. Send a short sample of a watertight STL edit with a slicer preview, so the client can judge print readiness.
  2. State which CAD or modelling tools you would use and confirm the work is done by hand, as the brief requires.
  3. Check the original STL and the reference picture before quoting, since the contour changes depend on both.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Do you have the original STL and the reference picture the client mentioned?
  • What print size and wall thickness should the spoiler be checked against?
  • Should the client receive the editable source file as well as the STL?

Common questions

How much does a 3D printable spoiler redesign project cost?

The posted budget is £20-250 GBP. That range looks workable for a focused edit of one existing STL, and tight if the client wants several wing variants or a full redesign.

What skills does a 3D printable spoiler project need?

It needs CAD or modelling skills for 3D printing, including watertight mesh checks and slicer testing. Show past 3D print edits of curved parts.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.