Skip to content

Bus Shelter Engineering Project for Fabrication Drawings and 3D Models

The client wants a bus shelter engineering project: detailed engineering and fabrication drawings for two public transport shelter models, starting from renders and basic product sheets. This brief covers the scope and what to check first.

  • Open · checked 12 Nov 2026
  • 3d Rendering
Budget$10,000–20,000 USD
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? $10,000–20,000 looks workable for modelling and drawings of two shelters if the renders are complete. It looks tight if the missing definitions and structural checks must be settled before drawing starts.

What the client needs

  • Review the renders and find the missing definitions before drawing.
  • Model both shelters in 3D, including frame, roof and base plates.
  • Produce fabrication drawings for the sheet-metal parts.
  • State the structural assumptions behind the design.

Skills the client asked for: 3D Rendering, Solidworks, Structural Engineering, AutoCAD, 3D Modelling, 3D Animation, 3D Design, Mechanical Design.

Where to aim your bid

Low$11,500
Sweet spot$14,000
High$17,000

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 36 3d Rendering briefs we have written in USD, the median budget is $140. We wrote 63 3d Rendering briefs in the last 7 days.

What the project involves

The client seeks a freelance professional in mechanical design, metal structures and sheet-metal fabrication to develop detailed engineering and fabrication drawings for two urban public-transport shelter models. The starting material is renders and basic descriptive sheets, so the first step is reviewing it and identifying missing definitions before fabrication documentation.

Scope of work

  • 3D modelling of both shelters: structure, roof, enclosures, seat, base plates and joints
  • Construction solutions compatible with the manufacturer's laser cutting, bending, welding and assembly
  • Resolving joints, fixings, roof slopes and drainage, plus mechanical provisions for lighting and maintenance
  • General drawings for approval of dimensions and geometry
  • Fabrication drawings for parts and subassemblies with dimensions, materials, thicknesses, holes, bends, welds and finishes
  • Assembly and parts drawings with a bill of materials and commercial components
  • DXF files for sheet cutting and unfolded bent parts, after agreeing bend radii and parameters with the manufacturer

Structural calculation, deliverables and exclusions

Structural verification of wind action, main structure, joints, base plates and anchors must be quoted separately as optional. If a third party provides it, the detailing follows their results and flags changes needing re-verification.

Deliverables: native editable and STEP 3D models, PDF and DWG drawings, DXF cutting files and an Excel bill of materials, with software and version stated. Two review rounds per model, with general drawings approved before final part drawings. Fixing errors in the contracted scope is not a design change.

Excluded: foundations, soil studies, electrical engineering, municipal approvals, professional signatures, fabrication, installation and on-site help. Prototype assistance and post-approval changes are budgeted separately. Applicants state fees and timeline per model, availability, similar work and documents needed to start.

How to win this project

  1. Show a finished set of fabrication drawings or a structural model, since the client needs manufacturing-ready documents.
  2. Flag the missing definitions in writing in your bid, because the brief expects you to find them before drawing.
  3. Ask which loads, standards and materials apply, so the structure is designed to a clear basis.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Which design codes and wind or load standards apply to the shelters?
  • Who will fabricate the shelters, and in which sheet-metal sizes?
  • Will one manufacturer build both shelter models?

Common questions

How much does a bus shelter engineering project cost?

The posted budget is $10,000–20,000 USD. That range looks workable for two shelter models with full fabrication drawings, but tight if the missing definitions must be settled from scratch.

What skills does this project need?

Mechanical design, SolidWorks, structural engineering, AutoCAD and 3D modelling are listed, with sheet-metal fabrication experience.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.