Skip to content

3D Laser Scan Revit Modeler Needed for a Three-Bedroom House

The client wants a 3D laser scan revit modeler to capture a three-bedroom house and its plot, then build a Revit model from the point cloud. This brief covers the scan scope, the site visit and how to bid.

  • Open · checked 12 Nov 2026
  • 🇬🇧 United Kingdom (budget currency)
  • Building Architecture
Budget£250–750 GBP
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? Tight if a site visit, a full scan and a Revit model must all fit in this range. Looks workable if the scope is limited to the stated architectural features.

What the client needs

  • Capture a full point cloud of every room, the exterior and the garden.
  • Record ceilings, stair flights, balustrades, joinery and chimney breasts.
  • Arrange a site visit to collect the scan data.
  • Build an accurate Revit model from the point cloud for drawings.

Skills the client asked for: Building Architecture, 3D Rendering, AutoCAD, 3D Modelling, 3D Design, Revit, 3D Architecture, 3D CAD.

Where to aim your bid

Low£325
Sweet spot£450
High£600

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 4 Building Architecture briefs we have written in GBP, the median budget is £500. We wrote 33 Building Architecture briefs in the last 7 days.

What the project involves

The client needs a full 3D laser scan of a three-bedroom house and its plot, covering every internal room, the whole exterior envelope, the garden and the immediate site. The point cloud will be used to prepare accurate drawings for planning and building approval and to create a 3D Revit model for a portfolio.

Level of detail and workflow

Ceilings, stair flights, balustrades, fixed joinery, chimney breasts and other permanent features must be captured. Fixtures, finishes and services are not needed beyond what an architect's plans and elevations require. A site visit is needed to gather scan data. Leica, Faro or similar LiDAR equipment is acceptable, and processing through Autodesk ReCap or equivalent is fine if the cloud imports cleanly into Revit 2026 or later. Scan stations should be dense enough to minimise shadow areas, especially under stairs and along roof eaves.

Deliverables

  • Registered point-cloud file (RCP, RCS or E57)
  • Native Revit 2026 model with levels, grids and views organised
  • Exported DWG and PDF plans, sections and elevations suitable for submission to the local authority

Acceptance and timing

Applicants should state which scanner they will use and outline their QA process.

  • Model checked against site dimensions at three random points per floor, within ±10 mm
  • Exterior ground levels tie back to the garden scan so contours generate in Revit's toposurface tool
  • Scanning completed within two weeks of award

How to win this project

  1. Describe your scanner and how you will check accuracy, since the drawings must support planning and building approval.
  2. Confirm access to the house and plot in advance so the site visit can be completed in one trip.
  3. Show a past point-cloud-to-Revit example, since the client plans to use the model in a portfolio.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Will the site visit allow access to every room and the exterior?
  • Which drawings or elevations are needed as the final output?
  • Who owns the scan data and the Revit model once they are delivered?

Common questions

How much does a 3D laser scan revit modeler cost?

The listed budget is £250–750 GBP. Ask whether the site visit and the scan are priced together, since both are part of the work.

What skills does a 3D laser scan revit modeler need?

The listed skills include AutoCAD, Revit, 3D modelling, 3D rendering, 3D design, 3D CAD and building architecture.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.