Skip to content

Architectural CAD Redraw Project Needing a Technician for Plans and Elevations

The client wants an architectural CAD redraw project: 1:50 plans, a roof plan and four elevations rebuilt from historical PDF scans. This brief covers scope, first step and bid tips.

  • Open · checked 12 Nov 2026
  • Cad Cam
Budget€8–300 EUR
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? Looks unclear: the range of €8 to €300 is too wide to judge. It is tight for a complete set of plans, a roof and four elevations; it looks workable only if the job is clearly defined and priced per drawing.

What the client needs

  • Confirm the PDF scans are legible and at 1:50 scale.
  • Redraw the first-floor plan from the ground-floor drawing.
  • Develop the roof plan to match the existing slopes and eaves.
  • Draw clean exterior elevations that match the scans.

Skills the client asked for: CAD/CAM, Building Architecture, 3D Rendering, AutoCAD, Building Design, Building Information Modeling, Architectural Engineering, 2D Drawing.

Where to aim your bid

Low€50
Sweet spot€125
High€210

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 4 Cad Cam briefs we have written in EUR, the median budget is €325. We wrote 62 Cad Cam briefs in the last 7 days.

What the project involves

The client wants a rigorous CAD technician or architect to redraw and develop a set of architectural plans at 1:50 scale. Historical 1:50 PDF scans of the building will be supplied, including the ground floor, existing elevations and two original sections.

Scope of work

  • First floor plan, drawn from the supplied ground floor
  • Roof plan matching existing slopes, eaves and dimensions
  • All four exterior elevations, redrawn cleanly while respecting local Swiss features such as shutters, roof eave details and terrain lines
  • Two new sections made by shifting the existing cut lines: a transversal section through the side annex and a longitudinal section through the kitchen

Drafting requirements

  • Clean geometry using closed polylines, with no loose lines, overlapping segments or exploded hatches
  • Swiss and European (SIA) drafting conventions, with elements organised into layers by type using a supplied layer template
  • Technical symbols, room text, level indicators and explicit section cut marks on the final sheets
  • All dimensions within 1 mm of the source files

Deliverables and application

Deliver one clean, purged, fully layered metric DWG per sheet plus matching print-ready PDFs. The target budget for this scope is 350 USD. Proposals must confirm use of closed polylines, show at least one earlier scan-to-CAD example and state experience with Swiss or European drawing codes.

How to win this project

  1. Name the CAD software you use and show a clean polyline sample, since the brief asks for clean polyline geometry.
  2. Ask for the original scans at full resolution and any dimensions printed on them, to avoid guessing measurements.
  3. Confirm which Swiss SIA drawing conventions apply and whether the client expects a specific layer or title-block layout.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Which Swiss SIA drawing standards and layer rules must the drawings follow?
  • Are the existing elevations complete, or do any views need projecting from the plans?
  • What file formats should the final drawings be delivered in?

Common questions

How much does an architectural CAD redraw project cost?

The posted budget is €8–300 EUR, a very wide range. Ask how each part is priced, since a full set of plans, a roof and four elevations is more than the low end suggests.

What skills does this redraw project need?

CAD drafting, reading historical scans to scale, building design knowledge, and clean geometry. Share a sample redraw of a plan at 1:50.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.