Skip to content

SolidWorks Simulation Freelancer for 1 to 15 Mechanical Assembly Variations

The client wants a SolidWorks simulation freelancer to modify a mechanical assembly into mid and post designs and run assembly FEA. The brief covers material assignment, interference checks, STEP AP242 export and bolt and contact modelling.

  • Open · checked 12 Nov 2026
  • 🇮🇳 India (budget currency)
  • Cad Cam
Budget₹75,000–120,000 INR
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? ₹75,000–120,000 INR looks workable if the work covers a few variants of standard bolted assemblies. It looks tight at fifteen variants with full FEA, since each variant adds CAD and simulation time.

What the client needs

  • Edit only the specified features of the existing pre-assembly to create each variant.
  • Assign the correct material to every part file and resolve unintended overlaps.
  • Run full assembly FEA with bolt preload, tie rods and contacts, then export STEP AP242.

Skills the client asked for: CAD/CAM, Solidworks, Mechanical Engineering, Finite Element Analysis, Manufacturing Design, 3D Modelling, 3D Design, 3D CAD.

Where to aim your bid

Low₹81,750
Sweet spot₹93,000
High₹106,500

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 13 Cad Cam briefs we have written in INR, the median budget is ₹25,000. We wrote 62 Cad Cam briefs in the last 7 days.

What the project involves

The client needs an experienced SolidWorks CAD and Simulation (FEA) freelancer for a mechanical assembly project with 1 to 15 design variations. Starting with one design as a trial is preferred, with the rest awarded on quality of work.

Scope of work

  • CAD: modify the existing pre-assembly into mid and post designs, editing only the specified features and not generating parts with scripts
  • Materials: assign the correct material to every part file
  • Inspection: run interference detection and resolve unintended overlaps
  • Export STEP AP242 directly from SolidWorks
  • FEA: full assembly-level simulation with bolt connectors, bolt preload, tie rods, bonded and no-penetration contacts and correct fixtures
  • Mesh convergence: high-quality quadratic elements and 3 to 4 refinement studies, with final result variation below 5 percent
  • Documentation: SolidWorks-generated reports and genuine screenshots showing the study tree, result legend and probe values

Deliverables

  • Native SolidWorks files (.SLDPRT and .SLDASM) and STEP AP242 files
  • Simulation result files (.CWR) for every design state
  • Result data exported as fields.csv and a mesh connectivity or VTU file
  • Mesh convergence tables and screenshots for every design state and mesh level
  • SolidWorks-generated simulation reports

Conditions

  • All CAD and simulation work must be done directly in SolidWorks
  • No Python-generated geometry, external plots, Gmsh or Open CASCADE exports
  • Loads, fixtures, contacts and mesh settings consistent across design states
  • Genuine, verifiable results are mandatory

What to include in the proposal

Apply only with practical SolidWorks assembly and Simulation experience. Include relevant samples, simulation experience, estimated delivery time and the price for one design and for 1 to 15 designs.

How to win this project

  1. Confirm the no-scripts rule in writing, since the client says parts must not be generated with scripts.
  2. Ask for the list of 1 to 15 variants early, so you can estimate the simulation time for each one.
  3. Describe how you will document the simulation settings and results for the client to review.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Which loads and fixtures should the simulation use for each variant?
  • Is there a target safety factor or stress limit to report against?
  • Who will review the STEP files and simulation reports before sign-off?

Common questions

How much does a SolidWorks simulation freelancer cost?

This brief lists ₹75,000–120,000 INR. Ask for the number of variants first, since the scope runs from one to fifteen design variations.

What should a SolidWorks simulation proposal include?

Your SolidWorks Simulation experience, how you will handle each variant, the STEP AP242 export plan and a sample results report.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.