Skip to content

UAV Aerofoil Engineer Needed to Optimise a Powered Lift Design

The client wants a UAV aerofoil engineer to optimise an existing aerofoil for powered lift, targeting at least 250 N at the design conditions. This brief covers the CFD baseline, the geometry changes and how the two designs will be compared.

  • Open · checked 12 Nov 2026
  • Cad Cam
Budget$750–1,500 USD
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? Looks workable if the scope stays to one baseline study and a small set of geometry changes. Tight if the client expects many iterations or full test validation within the same budget.

What the client needs

  • Run a 3D CFD baseline on the existing aerofoil before changing anything.
  • Develop geometry changes that increase lift at the design conditions.
  • Compare the original and optimised designs under identical conditions.
  • Write up the method and results so the client can verify them.

Skills the client asked for: CAD/CAM, Solidworks, Mechanical Engineering, Finite Element Analysis, Aerospace Engineering, Technical Documentation, Simulation, Computational Fluid Dynamics.

Where to aim your bid

Low$865
Sweet spot$1,050
High$1,300

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 32 Cad Cam briefs we have written in USD, the median budget is $500. We wrote 62 Cad Cam briefs in the last 7 days.

What the project involves

The client needs an aerodynamicist or CFD engineer to optimise an existing aerofoil on a prototype UAV. The goal is to maximise upward lift, aiming for at least 250 N at the stated design operating conditions. The aerofoil works inside a powered airflow, so experience with blown aerofoils, powered lift or similar applications is a plus.

The client will provide the current CAD geometry, operating conditions and detailed design constraints.

Scope and constraints

  • Run 3D CFD on the current configuration to set a baseline
  • Develop and evaluate geometry changes that raise lift
  • Compare original and optimised designs under identical conditions
  • Assess downstream airflow direction and distribution
  • Report lift, horizontal force and pitching moment for both designs
  • Keep the wingspan unchanged
  • Maintain the required downstream deflection angle and coverage
  • Stay within the supplied airflow conditions and propulsion limits
  • Further geometry and installation constraints come before work starts

Deliverables

  • Optimised CAD geometry in an agreed editable format
  • CFD setup and simulation files that let the results be reproduced
  • A concise technical report with flow visualisations, convergence evidence and a mesh-independence assessment
  • A clear statement of the lift achieved and any limitations against the 250 N target

What applicants should include

Share relevant work examples, the proposed CFD software and optimisation approach, and an estimated timescale. Also explain how you would judge whether the lift target is feasible before starting the full optimisation. Detailed geometry is shared only under a confidentiality agreement, and all deliverables and resulting design IP must belong to the client company.

How to win this project

  1. Say how you would validate the CFD against a known case, since the client needs a credible lift number, not only a trend.
  2. Name the CFD and CAD tools you would use, and show any past blown-wing or powered-lift work, which the client says would be beneficial.
  3. Propose a short first pass on the baseline with a lift estimate, so the client can judge the approach before the full optimisation.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • What are the design operating conditions, including airspeed and angle of attack?
  • Which CAD format and CFD tool do you prefer to work in?
  • Is the 250 N target a hard requirement or a goal to beat?

Common questions

How much does a UAV aerofoil engineer cost?

The client's budget is $750–1,500 USD. That looks workable for a baseline CFD study and one round of geometry changes, and tighter if several design iterations are expected.

What should a UAV aerofoil engineer proposal include?

A short method outline covering the CFD setup, the geometry changes you would test, how the designs will be compared, and the lift results you will deliver.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.