Skip to content

Compact RGB LED PCB Designer Needed for a Battery-Powered Teardrop Board

The client wants a compact RGB LED PCB designer to design a battery-powered board with component layout and firmware in five days. This brief covers the hardware scope, the agreement terms and what to confirm before bidding.

  • Open · checked 12 Nov 2026
  • Electronics
Budget$75–150 USD
TimelineFive days to complete the project
Skills asked5
Posted1 week ago

Is the budget fair? Tight if a full board layout, firmware and manufacturing sourcing are all expected in five days at this budget. Looks workable if the scope is design files and firmware only.

What the client needs

  • Design a compact, battery-powered RGB LED circuit board.
  • Lay out the components on a small teardrop-shaped board.
  • Include the firmware the project needs.
  • Accept the client's work-for-hire and non-reverse-engineering terms.

Skills the client asked for: Electronics, Electrical Engineering, PCB Layout, Circuit Design, DFM (Design for Manufacturing).

Where to aim your bid

Low$85
Sweet spot$105
High$130

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 11 Electronics briefs we have written in USD, the median budget is $500. We wrote 20 Electronics briefs in the last 7 days.

What the project involves

The client wants an experienced electrical engineer to design a compact, efficient, reliable and safe battery-powered RGB LED PCB within 5 days, with revisions until it is right. Firmware is part of the project, and the engineer must sign a work-made-for-hire agreement and a non-reverse-engineering agreement.

Board requirements

  • Teardrop-shaped board, 44 mm x 32 mm, with mounting holes and edge clearance
  • 18 miniature RGB LEDs with adjustable colour and brightness
  • One CR2477 coin cell in a low-profile, secure, replaceable holder, targeting 8 hours of operation
  • One push button for on/off, dimming and colour, tall enough to protrude through the case
  • Minimal thickness, low-profile parts, and a design that avoids overheating, shorts and fire or burn hazards
  • The engineer selects all components and designs the full circuit for manufacturing

Deliverables

Everything must be manufacturing-ready without redesign, with a validated prototype design and fixes for any errors, using simulation and verification software. Applicants should show similar PCB projects and may recommend low-cost, fast assembly manufacturers.

  • Gerber and NC drill files
  • Bill of materials with manufacturer part numbers and pick-and-place files
  • Schematics in PDF and editable form, plus editable KiCad or Altium files
  • Fabrication and assembly drawings and a 3D STEP model
  • Safety, battery-life and thermal testing documentation
  • Firmware and programming files

How to win this project

  1. Share examples of similar PCB projects, since the client asks for them up front.
  2. Confirm whether the five-day schedule covers design files only or prototypes as well, and say what is excluded.
  3. Read the work-for-hire and non-reverse-engineering agreements before you accept, and ask for changes if needed.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Is the five-day timeline for design files only, or for prototypes too?
  • Is there a schematic or component list to start from?
  • Should manufacturing and sourcing advice be included in the price?

Common questions

How much does a compact RGB LED PCB designer cost?

The posted budget is $75–150 USD. Board design and firmware at this price need a clear scope, so list which parts are included before you quote.

What should a compact RGB LED PCB designer proposal include?

Include examples of similar boards, your layout and manufacturing approach, how you handle the firmware and your view of the five-day timeline.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.