RGB LED PCB Design Project for a Compact Battery-Powered Board
An RGB LED PCB design project asks for a compact, battery-powered board with 18 miniature LEDs, plus firmware and manufacturing advice. This brief covers the board specification, the timeline and how to bid.
- Open · checked 12 Nov 2026
- Electronics
Is the budget fair? $75–125 USD looks tight for a compact PCB, firmware, manufacturing advice and agreements delivered within five days. It looks workable only if the scope is the board design and a short firmware sample.
What the client needs
- Design a compact, teardrop-shaped battery-powered LED board of 44 by 32 mm.
- Lay out the components for efficient, safe and reliable operation.
- Write the firmware for the board.
- Sign a work-for-hire agreement and a non-reverse-engineering agreement.
Skills the client asked for: Electronics, Electrical Engineering, PCB Layout, Circuit Design, DFM (Design for Manufacturing).
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
Across the 11 Electronics briefs we have written in USD, the median budget is $500. We wrote 20 Electronics briefs in the last 7 days.
What the project involves
The client wants an experienced electrical engineer to design a compact, battery-powered RGB LED PCB that is efficient, reliable and safe, completed in 5 days, with adjustments until it is right. Firmware is included. Applicants should show similar PCB projects and may suggest good manufacturers for low-cost, fast PCB fabrication and assembly. A work-made-for-hire agreement and a non-reverse-engineering agreement must be signed.
Board requirements
- Teardrop-shaped PCB, 44 mm x 32 mm, with mounting holes and edge clearance
- 18 miniature RGB LEDs with adjustable colour and brightness
- One CR2477 3V coin cell in a low-profile, secure, easily replaceable holder, targeting 8 hours of continuous use if feasible
- One push button for on and off, dimming and colour selection, tall enough to protrude through the case
- As thin as possible, with few components that are common and easy to source
- The engineer selects all components and designs the full circuit, for manufacturing
Deliverables
- Gerber and NC drill files, BOM with manufacturer part numbers and pick-and-place files
- Schematics (PDF and editable) and editable KiCad or Altium design files
- Fabrication and assembly drawings and a 3D STEP model
- Firmware and programming files, battery-life and thermal calculations
- Electrical safety, battery-life and thermal test documentation
- Validated prototype design with errors corrected, using simulation and verification; a working prototype with testing is quoted separately
Safety and terms
Highest priority: prevent overheating, burns, short circuits and fire; minimise current draw and heat; include electrical and thermal protection; verify safe operation; recommend safer parts where needed. Applicants need miniature battery-powered PCB, RGB LED, low-power and thermal safety experience. The product is confidential, the client owns all copyrights and files, and milestones are released only after everything is delivered, tested and accepted. The client does not communicate on Sundays.
How to win this project
- Share similar PCB projects with layout and firmware work, since the client asks for examples first.
- Confirm that five days is realistic for layout, firmware and revisions before you quote.
- Ask whether manufacturing sourcing is part of the fee, since the brief also asks for manufacturer and component price advice.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- Is the manufacturing and assembly quote part of this project or separate?
- Does the fee cover revisions until the design is approved?
- What battery type and runtime does the board need?
Common questions
How much does an RGB LED PCB design project cost?
The budget is $75–125 USD. Check whether that covers the design, firmware and manufacturing advice, since the brief asks for all three within five days.
What skills does an RGB LED PCB design project need?
The brief lists PCB layout, circuit design, electronics, electrical engineering and design for manufacturing. Firmware work is also asked for.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.