Skip to content

Sensor Triggered Dispenser Prototype Project with a Wireless Remote Unit

A sensor triggered dispenser prototype project asks for two paired units that link wirelessly. The client wants adjustable spray, rechargeable batteries and proof-of-concept hardware, and this brief covers what to show in your bid.

  • Open ยท checked 12 Nov 2026
  • ๐Ÿ‡ฆ๐Ÿ‡บ Australia (budget currency)
  • Electronics
BudgetA$750โ€“1,500 AUD
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? The A$750โ€“1,500 AUD range looks tight for two working units with wireless pairing, adjustable settings and batteries. It looks workable for a proof of concept if the scope stays with the core features.

What the client needs

  • Build a proof-of-concept pair of wireless units.
  • Make spray duration, delay, force and pattern user-adjustable.
  • Support a motion sensor or a weight-threshold pad as the trigger.
  • Use rechargeable batteries in both units.

Skills the client asked for: Electronics, Mechanical Engineering, PCB Layout, Manufacturing Design, Product Design, Arduino, 3D Printing, Embedded Systems.

Where to aim your bid

LowA$865
Sweet spotA$1,050
HighA$1,300

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Prototype to be built

The client needs an embedded and mechanical engineer to build a proof of concept of two paired units: a remote trigger and a fluid dispenser. The trigger is either a motion sensor or a weight-threshold pad wired to the trigger unit. The units link wirelessly so the trigger can be mounted remotely, one trigger per dispenser, for indoor use with a water-based fluid. Full application details are shared under NDA after shortlisting.

Requirements

  • Dispenser settings adjustable by the user: spray duration, activation delay, force and pattern (fine mist or direct stream)
  • Weight trigger behaves as a simple threshold trip, same as motion
  • Both units have a rechargeable battery, USB-C charging and direct USB-C operation that bypasses the battery
  • Prototype enclosure by 3D printing or CNC, with a clear path to injection moulding
  • Production-grade, multi-sourced parts with an alternate for each critical component
  • Wetted path (pump, tubing, nozzle, seals) rated for common additives

Deliverables

  • One working prototype pair plus one spare trigger unit, shipped to the client
  • Schematics, Gerbers and firmware source (KiCad or Altium; Arduino, ESP32 or STM32)
  • STEP files for enclosures and moving parts
  • Costed bill of materials
  • Full IP assignment to the client on payment, with no reuse of the design for other clients

Acceptance tests and milestones

Applicants must address all four milestones and give a fixed cost estimate.

  • Trigger-to-spray latency under 300 ms, excluding the user-set delay
  • 20 of 20 consecutive trials pass for each trigger type
  • No false triggers over 60 minutes idle
  • Each setting measurably changes the output
  • Milestones: concept, wireless protocol, pump choice and draft BOM; design sign-off then schematic, PCB and CAD; assembled prototype and firmware; shipped, tested and accepted

How to win this project

  1. Show a prototype or electronics project with a wireless link, since the brief is about pairing two units.
  2. Explain how the dispenser will handle a water-based fluid safely in an indoor setting.
  3. The full application details come under NDA after shortlisting, so ask what you can see before you quote.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • What weight range should the pad detect?
  • What battery life between charges is the target?
  • What wireless range is needed between the two units?

Common questions

How much does a sensor triggered dispenser prototype project cost?

This brief lists A$750โ€“1,500 AUD for a proof of concept. The mechanical build and the electronics will both affect where the price sits.

What should a sensor triggered dispenser prototype project proposal include?

Examples of embedded or mechanical prototypes, your wireless approach, and how you would handle the adjustable settings.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.