Skip to content

Battery-Powered Smart Device Prototype Project with Companion App

The client wants a smart device prototype project: an initial battery-powered electronics prototype with wireless connectivity and a companion mobile app for a new hardware product. This brief covers the required skills, first steps and how to bid.

  • Open · checked 12 Nov 2026
  • 🇬🇧 United Kingdom (budget currency)
  • Electronics
Budget£20–250 GBP
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? The GBP 20 to 250 budget looks tight for a battery-powered prototype with wireless and app work. It may be workable only if the first phase is limited to reviewing requirements and outlining the circuit design.

What the client needs

  • Review the technical requirements before quoting.
  • Design the circuit board and firmware for a compact battery-powered device.
  • Build an initial prototype with wireless connectivity and test it.

Skills the client asked for: Electronics, Electrical Engineering, PCB Layout, Product Design, Circuit Design, Embedded Systems, Technical Documentation, Firmware Development.

Where to aim your bid

Low£55
Sweet spot£110
High£180

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

What the project involves

A UK-based entrepreneur at an early stage, with a business concept but no prototype or technical team, wants an experienced electronics engineer to build a first prototype of a compact, battery-powered smart device with wireless connectivity and a companion mobile app. The project is confidential, and further details are shared with shortlisted candidates after confidentiality is discussed.

Experience wanted

  • Electronics and PCB design
  • Embedded systems and firmware
  • GPS and wireless connectivity
  • Battery-powered devices and IoT
  • Product prototyping and testing
  • Preparing products for manufacturing

Initial tasks

The client would like to start with a small paid feasibility project and is open to a long-term relationship.

  • Review the technical requirements
  • Recommend suitable electronic components
  • Explain how a working prototype could be developed
  • Estimate development and prototype costs
  • Advise on future manufacturing options

How to apply

Applicants should provide their experience, examples of previous projects, estimated initial costs and availability.

How to win this project

  1. Ask for the full technical requirements and the budget breakdown, since the listed budget is small for a prototype.
  2. Propose a phased quote: requirements review, first board design, then the prototype build.
  3. Confirm confidentiality terms early, since the client describes the project as confidential.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Is there a requirements document or block diagram for the device?
  • Which wireless standards and battery size does the device need?
  • Will the companion app be built by you or by another team?

Common questions

How much does a smart device prototype project cost?

The posted budget is GBP 20 to 250. That looks tight for a full electronics prototype and may only cover a requirements review or an early design step.

What should a smart device prototype project proposal include?

Describe your PCB and embedded experience, the phases you would deliver, how you would test the prototype, and how you handle confidentiality.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.