Synchronous Reluctance Motor Design Freelancer for an EV or E-Bike Drive
The client wants a synchronous reluctance motor design freelancer to design a magnet-free motor for electric vehicles or e-bikes. This brief covers the power targets, the skills a bid should show and how to price the design.
- Open · checked 12 Nov 2026
- 🇮🇳 India (budget currency)
- Electronics
Is the budget fair? The ₹12,500–37,500 INR budget looks tight for a full magnet-free motor design that must meet the stated peak and torque targets. It looks workable only if the work is limited to a defined design study.
What the client needs
- Design a magnet-free synchronous reluctance motor rated 1 to 10 kW.
- Meet the stated 6.7 kW peak and 4.5 kW continuous power targets.
- Reach the maximum motor torque of 26 Nm.
- Show experience with electric vehicle or e-bike motor requirements.
Skills the client asked for: Electronics, Mechanical Engineering, Electrical Engineering, Mechatronics, Product Design, Embedded Systems, Motor Control, Prototyping.
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
Across the 4 Electronics briefs we have written in INR, the median budget is ₹16,000. We wrote 20 Electronics briefs in the last 7 days.
What the project involves
The client needs an experienced motor designer to create a magnet-free synchronous reluctance motor for electric vehicles or e-bikes, operating in a power range of 1 to 10 kW.
Key requirements
- A synchronous reluctance motor design without magnets
- Power output between 1 and 10 kW
- Suitable for electric vehicle or e-bike use
Target specifications
- Peak power 6.7 kW (9.0 BHP) and continuous power 4.5 kW (6.0 BHP)
- Maximum motor torque 26 Nm
- Nominal 48 V DC architecture
- Estimated peak current draw of 135 to 140 A from the controller under maximum acceleration
- Three-phase AC input from the inverter
Ideal skills and experience
- Expertise in synchronous reluctance motor design
- Experience with EV or e-bike motor requirements
- A strong electrical engineering and motor design background
How to win this project
- Lead with a motor design you have built or simulated, and state its peak power, continuous power and torque for comparison with the targets.
- Explain how you would reach 4.5 kW continuous power inside the 1 to 10 kW range, and which thermal limits you would check.
- Describe your design process from electromagnetic analysis to prototype, and what you would test first on the prototype.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- Is the nominal operating point, including speed and voltage, already fixed?
- Does the client need a simulation-only design, or a built and tested prototype?
- Is this a one-off prototype or a design for production?
Common questions
How much does a synchronous reluctance motor design freelancer cost?
The brief lists a budget of ₹12,500–37,500 INR. That range looks small for a full motor design, so confirm whether prototyping and testing are included before you quote.
Which skills does this motor design need?
Motor design expertise, electrical and mechanical engineering, motor control, embedded systems and prototyping, plus EV or e-bike requirements.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.