Skip to content

Ultra-Slim Wearable Enclosure Designer for a Compact Device Housing

The client wants an ultra-slim wearable enclosure designer to create a housing that keeps a small circuit board as thin as possible. The brief covers battery placement, board layout and how the two shells should fasten together.

  • Open · checked 12 Nov 2026
  • Electronics
Budget$250–750 USD
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? The budget looks workable for enclosure concepts and CAD design. It is tight if the client also expects a battery redesign, board changes and prototype testing within the same fee.

What the client needs

  • Design a very thin two-part enclosure for a small board.
  • Rethink battery placement to reduce overall thickness.
  • Advise on the locking or fastening method.
  • Work with CAD and 3D modelling tools.

Skills the client asked for: Electronics, CAD/CAM, Mechanical Engineering, PCB Layout, Product Design, 3D Modelling, 3D Design, 3D CAD.

Where to aim your bid

Low$325
Sweet spot$450
High$600

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 11 Electronics briefs we have written in USD, the median budget is $500. We wrote 20 Electronics briefs in the last 7 days.

What the project involves

The client needs an experienced product or mechanical designer to create an enclosure for a small PCB in a handheld or wearable hospital device worn by a nurse. The priority is making the finished product as thin as possible for comfort against the body or in a pocket. The battery currently sets the minimum thickness, so changing how it is installed, perhaps with a cut-out in the PCB, could help. No styling overhaul is needed.

Design questions to resolve

Quick turnaround is critical: initial concepts right away and a manufacturable model after approval.

  • How to lock or join the two enclosure pieces, such as one screw or four
  • Easy battery replacement now and then
  • A hole for a light indicator on the board
  • Placement of a vibration device that contacts the board
  • Balance of internal stacking, component clearance, thermal safety, structural integrity, thin-wall moulding materials and connector access

Deliverables

Proven ultra-compact consumer electronics enclosure work and immediate availability are expected.

  • 3D CAD files in STEP or SolidWorks, ready for injection moulding or high-resolution printing
  • Dimensioned drawings showing wall thickness, tolerances and assembly method
  • A brief report on material choice and any cooling or reinforcement features

How to win this project

  1. Ask for the battery type and size and the board dimensions, since battery thickness currently sets the minimum.
  2. Show a wearable or handheld enclosure you designed, with its fastening method and how you handled thickness limits.
  3. Raise comfort and clinical requirements early, since a medical-use wearable may need extra review before release.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • What are the current board and battery dimensions?
  • Would the electronics team accept a battery change or a board cutout?
  • Which fastening method is preferred: screws, clips or another system?

Common questions

How much does an ultra-slim wearable enclosure designer cost?

The listed budget is $250–750 USD. Enclosure concept and CAD work is limited in scope, so check whether prototyping or board changes are included.

What should an ultra-slim wearable enclosure designer proposal include?

Examples of compact enclosures, your approach to battery and board layout, the fastening options and the design files you will deliver.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.