Skip to content

Desalination Proposal Project: Process Design and Cost Estimates

This desalination proposal project is a complete seawater plant bid package, from raw-water analysis to treated-water delivery. The client wants process design, equipment selection, drawings and a capex and first-year opex estimate.

  • Open · checked 12 Nov 2026
  • Engineering
Budget$25–50 per hour USD
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? Looks workable if the scope is one plant design using standard equipment. Tight if the full drawing set, simulations and cost work are expected in a small number of hours.

What the client needs

  • Build the process design from raw-water analysis to treated-water delivery.
  • Select equipment and prepare data sheets.
  • Produce PFDs, P&IDs, mass balances and general-arrangement drawings.
  • Prepare a capex and first-year opex cost breakdown.

Skills the client asked for: Engineering, Excel, Mechanical Engineering, AutoCAD, Technical Documentation, Water Treatment, Process Engineering, Process Simulation.

Where to aim your bid

Low$30
Sweet spot$35
High$45

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 10 Engineering briefs we have written in USD, the median budget is $500. We wrote 17 Engineering briefs in the last 7 days.

Project scope

The client is preparing a full bid package for a new seawater desalination project and needs a process-minded engineer to assemble every element of the proposal. The scope is the whole front end: process design, equipment selection, technical documentation and a clear capital and operating cost estimate.

Expected output

  • A complete, self-contained proposal moving logically from raw-water analysis to treated-water delivery
  • Key engineering documents: PFDs, P&IDs, mass-balance tables, equipment data sheets, general-arrangement drawings and any hydraulic or energy-recovery calculations
  • A transparent CAPEX and first-year OPEX breakdown with supporting assumptions, ready to drop into a client quotation
  • Design software files such as AutoCAD drawings, Excel sizing sheets and process simulation outputs, so the work can be audited

Proposal requirements

Applicants should attach a detailed proposal showing how each section will be handled, preferred design tools and an indicative timeline. Past desalination or seawater treatment experience is valuable, but the depth and clarity of the proposed approach is the deciding factor.

Once feed-water parameters and target capacity are agreed, the client will release the background data needed to start engineering.

How to win this project

  1. Confirm the raw-water analysis data before you start, since every later sizing step depends on it.
  2. Name the process simulation and drawing software you will use, and the standards you will follow.
  3. Price the document set separately from engineering hours, so the client can compare the two.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Is there a raw-water analysis and a target plant capacity?
  • Which drawing and document standards does the bid require?
  • Will the client supply pumping or energy-recovery assumptions?

Common questions

How much does desalination proposal engineering cost?

This project lists $25–50 per hour USD. Estimate the hours for the full document set, then check your rate against that range.

What should a desalination proposal project include?

A process narrative, PFDs and P&IDs, a mass balance, equipment data sheets and a transparent capex and opex breakdown.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.