Skip to content

Implantable PIFA Antenna Simulation Project in HFSS

The client wants an implantable PIFA antenna simulation project in HFSS that tests how design changes perform at shallow implant depths in muscle tissue. This brief covers the four configurations, the depths and the report scope.

  • Open · checked 12 Nov 2026
  • 🇮🇳 India (budget currency)
  • Engineering
Budget₹1,500–12,500 INR
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? The ₹1,500–12,500 budget looks tight for sixteen simulated cases with full reports. It looks workable only if the client accepts a focused report on the fixed stack-up.

What the client needs

  • Run simulations of four antenna configurations at 1, 2, 3 and 4 mm depths.
  • Report S11, resonant frequency shift and −10 dB bandwidth for each case.
  • Compare spiral geometry changes and substrate or coating changes side by side.
  • Report the other performance metrics the client lists for each design and depth.

Skills the client asked for: Engineering, Mechanical Engineering, Electrical Engineering, Finite Element Analysis, Antenna Design, Signal Processing, Data Analysis, Research and Development.

Where to aim your bid

Low₹3,150
Sweet spot₹5,900
High₹9,200

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 6 Engineering briefs we have written in INR, the median budget is ₹16,000. We wrote 17 Engineering briefs in the last 7 days.

What the project involves

The client has a spiral-rectangular PIFA antenna that must operate at 403 MHz when implanted in muscle tissue. The stack-up is fixed: a 20 by 20 by 0.2 mm polyimide substrate and a 15 by 15 by 2 mm PDMS with Fe3O4 layer, surrounded by a homogeneous muscle phantom. The aim is to learn how small design changes affect performance at implantation depths of 1, 2, 3 and 4 mm.

Simulation scope

Four configurations are compared, varying the spiral geometry or number of turns and changing the substrate or protective coating while keeping the polyimide core. The tissue model stays muscle-only.

  • For each design and depth, an HFSS report covering S11, resonant frequency shift, minus 10 dB bandwidth, realized gain, radiation efficiency and SAR

Deliverables

  • HFSS .aedt projects and linked files for all four antennas and depths
  • A concise side-by-side spreadsheet or table of extracted metrics
  • Publication-quality plots: S-parameters, gain patterns, SAR slices, efficiency and surface currents
  • A brief comparative discussion naming the best candidate and trade-offs

How to win this project

  1. Show you have modelled implanted or body-worn antennas in HFSS before, and name the tissue model you used.
  2. Propose a simple table layout for the four designs and four depths, so the client can compare results at a glance.
  3. Confirm the material properties and phantom details you will use before starting, since the stack-up is fixed.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Which tissue dielectric values should the muscle phantom use?
  • Should the report include measured data, or simulation only?
  • What format should the full HFSS report and project files come in?

Common questions

How much does an implantable PIFA antenna simulation project cost?

The posted budget is ₹1,500–12,500 INR. That is modest for four designs at four depths with full reports, so confirm how much of the work is included.

What skills does an implantable PIFA antenna simulation project need?

Antenna design, finite element analysis, signal processing and data analysis. HFSS experience with implanted antennas is central to this work.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.