Skip to content

Ship Resistance CFD Simulation Needed for a Container Ship Hull

The client wants a ship resistance CFD simulation of a container ship hull at Froude number 0.15, using the double-body method in ANSYS Fluent. The work covers hull geometry, a viscous grid, a steady RANS setup and benchmarking against published data.

  • Open · checked 12 Nov 2026
  • 🇮🇳 India (budget currency)
  • Engineering
Budget₹1,500–12,500 INR
TimelineNot stated
Skills asked7
Posted1 week ago

Is the budget fair? The ₹1,500–12,500 budget looks tight for a full geometry, meshing, RANS and validation study. It looks workable only if the hull geometry and reference data are supplied and the scope stays at one speed.

What the client needs

  • Set up a steady RANS simulation in ANSYS Fluent.
  • Apply the double-body method at Froude number 0.15.
  • Generate a viscous grid and choose a suitable turbulence model.
  • Validate total resistance against published reference data.

Skills the client asked for: Engineering, Mechanical Engineering, Finite Element Analysis, Statistical Analysis, Visualization, Data Analysis, Marine Engineering.

Where to aim your bid

Low₹3,150
Sweet spot₹5,900
High₹9,200

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 6 Engineering briefs we have written in INR, the median budget is ₹16,000. We wrote 17 Engineering briefs in the last 7 days.

What the project involves

The client is preparing a hydrodynamic study of a container ship hull at a Froude number of 0.15, using the double-body method in ANSYS Fluent. The aim is to predict total resistance, document every modelling decision and compare the results with reliable reference data.

Simulation workflow

  • Source or recreate a clean hull surface and find published resistance data suitable for validation at Fn 0.15
  • Import the geometry and generate an adequate viscous grid
  • Set up a steady RANS solver with an appropriate turbulence model
  • Define boundary conditions reflecting the double-body assumption, with no free surface
  • Run the case, then post-process forces and coefficients
  • Capture each step with screenshots and concise explanations so the procedure can be repeated

Final report

Once converged, a professional report is needed covering methodology, mesh independence, solver settings, convergence histories, resistance breakdown and a side-by-side comparison with the reference values, highlighting discrepancies with possible reasons or improvements.

Deliverables and acceptance

  • Complete Fluent and Workbench files and meshes that reopen cleanly
  • A step-by-step illustrated guide as PDF or Word
  • The final technical report with validation section and comparison plots
  • Archived files from any extra utilities used, such as ICEM, SpaceClaim or OpenFOAM cross-checks
  • Acceptance criteria: accuracy, clarity of documentation and reproducibility

How to win this project

  1. Ask whether the client has the hull geometry or needs you to source or recreate it, before you quote.
  2. Plan the validation step early, since the brief asks for a benchmark against published resistance data.
  3. Document each modelling choice in a short report, as the client asks for a full record.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Does the client already have the hull surface file, and in which format?
  • Which published resistance data set should the results be compared with?
  • Which ANSYS Fluent version and licence will be used?

Common questions

How much does a ship resistance cfd simulation cost?

The budget for this brief is ₹1,500–12,500 INR. Confirm whether the fee covers geometry, meshing and validation or only the solver run.

What skills does a ship resistance cfd simulation need?

The brief calls for marine engineering, finite element analysis and data analysis skills, along with ANSYS Fluent workflow experience.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.