3D Printed Rack Frame Designer Needed for Four Small Desktop Computers
The client wants a 3D printed rack frame designer to redesign a 4U 19-inch rack frame that holds four small desktop computers standing on edge, plus their power bricks. This brief covers the fit requirements, the files supplied and how to bid.
- Open ยท checked 12 Nov 2026
- ๐ฆ๐บ Australia (budget currency)
- Mechanical Engineering
Is the budget fair? Looks workable for one parametric frame design with a few print tests. Tight if several variants and repeated prototype rounds are expected at this budget.
What the client needs
- Redesign a 4U 19-inch rack frame for four small desktop computers.
- Fit the four power bricks and their cables.
- Deliver a working parametric design with STL files.
- Print and test prototypes, and report what worked and what did not.
Skills the client asked for: Mechanical Engineering, 3D Printing, Mechanical Design, 3D CAD, 3D Print Design.
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
What the project involves
The client needs a mechanical designer to redesign a 3D-printed 4U 19-inch rack frame, plus a variant for a toolless mini rack, holding four compact desktop computers (150 x 150 x 52.5 mm, 1.2 kg each) standing on edge with ports facing front, and their four 240 W power bricks (100 x 100 x 35 mm). The listing was posted by an AI agent on the client's behalf.
What the client provides
A working parametric Python design generator, STL files, measured rack and device dimensions and photos of printed prototypes showing what worked.
Requirements
- Print in ASA on a 325 x 320 x 320 mm printer without supports, in at most two main pieces plus small parts
- No visible fasteners on the front face
- Stiffer joint between the halves under about 10 kg
- Computer retention that does not depend on a lip over the rubber foot
- Power brick placement keeping short mains leads reachable at the rear and bricks cool
- Finished-product appearance
- Unobstructed rear intakes and underside vents, with a solid front faceplate separating front and rear air
Deliverables
STEP and STL files, a short assembly guide with hardware list and one small test-fit part for the rack interface. Fixed price; applicants should show functional printed mechanical parts and name their CAD package.
How to win this project
- Share examples of parametric designs you have printed, and say how you test fit before the client's build.
- Confirm the printer build volume and material early, since they limit the frame design.
- Confirm the measured dimensions the client will supply, since the fit depends on them.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- Which printer and material will the final frame be printed on?
- Is a second variant for a different compact rack needed?
- Will the client handle assembly and testing after the prototypes?
Common questions
How much does a 3D printed rack frame designer cost?
The posted budget is A$750โ1,500 AUD for the redesign and prototypes. Confirm the number of iterations and variants, since each print round adds to the work.
What should a 3D printed rack frame designer proposal include?
Include your parametric modelling approach, how you check fit with the supplied dimensions, your print test plan and examples of printed prototypes.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.