Dual Band Antenna Design Project for 1x8 and 1x16 Microstrip Arrays
A dual band antenna design project where the client wants 1x8 and 1x16 microstrip patch arrays covering two strictly defined frequency bands. This brief covers the band targets, the deliverables and how to bid.
- Open · checked 12 Nov 2026
- 🇮🇳 India (budget currency)
- Project Management
Is the budget fair? The ₹12,500–37,500 INR budget looks workable if the work is two array designs with simulated results and no major redesign. It looks tight if the client expects fabrication support or repeated rounds of changes.
What the client needs
- Confirm the two frequency bands, the tolerance and the gain targets before designing.
- Build the base patch and both array layouts in simulation.
- Deliver the project files and a results folder ready to run.
Skills the client asked for: Project Management, Electronics, 3D Rendering, Circuit Design, Antenna Design, Signal Processing, Prototyping, Technical Documentation.
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
Across the 10 Project Management briefs we have written in INR, the median budget is ₹25,000. We wrote 58 Project Management briefs in the last 7 days.
What the project involves
The client needs a dual-band microstrip patch antenna array in both 1x8 and 1x16 configurations, matching objective 2 in an uploaded reference document. The arrays must cover two strictly defined bands, 5.925 to 6.425 GHz and 6.725 to 7.025 GHz, with a tolerance no wider than plus or minus 1 MHz across the whole aperture.
Targets
- Maximum broadside gain of about 14 dB for the 1x8 array
- Maximum broadside gain of about 17 dB for the 1x16 array, as seen in the 3D radiation plot
Deliverables and cooperation
- The design files plus the base patch file
- The results folder, so everything can be run straight away in Ansys HFSS 2025 R1
- Cooperation if modifications are requested later
How to win this project
- Show a simulated broadside gain plot for a single patch, so the client can see your method before committing to the arrays.
- Name the simulation software version you will use and confirm it matches the client's copy.
- State how you will hold the frequency tolerance across the whole aperture, since the brief sets a tight limit.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- Is the reference document with the design objectives the final version?
- Do you need the arrays fabricated, or only simulated files?
- How many change rounds should the bid include for requested modifications?
Common questions
How much does a dual band antenna design project cost?
The posted budget is ₹12,500–37,500 INR. Scope your bid to the two arrays, the base patch file and the results folder, and say how requested changes are priced.
What skills does antenna array design need?
Microstrip patch design, electromagnetic simulation, and the ability to report gain and frequency results clearly.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.