Skip to content

Phase Change Material Simulation Developer for a Tube-in-PCM Heat Exchanger

The client wants a phase change material simulation developer for a transient model of a tube-in-PCM heat exchanger. This brief covers the scope, the inputs they want to vary and how to bid.

  • Open · checked 12 Nov 2026
  • 🇮🇳 India (budget currency)
  • Python
Budget₹12,500–37,500 INR
TimelineNot stated
Skills asked8
Posted1 week ago

Is the budget fair? Looks workable if the job is one validated model with adjustable inputs. Tight if the client also expects experimental validation or extensive documentation at this budget, since the brief does not mention either.

What the client needs

  • Build a transient numerical model of melt and solidification in a tube-in-PCM heat exchanger.
  • Make tube-side inlet temperature, flow rate and PCM properties adjustable inputs.
  • Use the skills the client listed, such as Python, MATLAB or CFD tools.
  • Structure the code so new operating scenarios need no rewrite.

Skills the client asked for: Python, Matlab and Mathematica, Finite Element Analysis, Fortran, LabVIEW, Thermal Analysis, Simulation, Computational Fluid Dynamics.

Where to aim your bid

Low₹16,250
Sweet spot₹22,500
High₹30,000

The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.

Across the 11 Python briefs we have written in INR, the median budget is ₹25,000. We wrote 30 Python briefs in the last 7 days.

What the project involves

The client needs a complete numerical model of how quickly phase-change material inside a latent-heat storage unit melts and solidifies while heat-transfer fluid flows through several parallel tubes. The geometry is a tube-in-PCM heat exchanger, not a packed bed or a single straight tube.

Model requirements

  • Accurate transient prediction of the melt and solidification front, local temperatures and energy stored or released over time
  • Adjustable tube-side inlet temperature, flow rate and PCM properties so new scenarios run without rewriting code
  • Any platform is fine (ANSYS Fluent, COMSOL, OpenFOAM, or custom Python/FORTRAN with an enthalpy method) provided phase change is treated properly and results can be regenerated
  • All assumptions, boundary conditions and material data documented

Deliverables and acceptance

The client will re-run the case, check that melt and freeze times match the report and confirm that parameter changes give physically sensible trends.

  • Simulation setup files and source code
  • Clear instructions for rerunning and modifying the case
  • Short report on model formulation, verification and key plots: temperature fields, melt/freeze fraction over time and energy stored

How to win this project

  1. Show in your first reply how you will model the tube-in-PCM geometry, not a packed bed or a single tube.
  2. Describe how you will check the melt front, local temperatures and stored energy, since accuracy is the main requirement.
  3. Explain the input structure so inlet temperature, flow rate and PCM properties can change without editing code.

Questions to ask the client

A specific question in your first message shows you read the brief. Pick one or two:

  • Which PCM and heat-transfer fluid properties do you already have, and in what form?
  • Do you have experimental or reference data to compare the model against?
  • Which language or tool should the final model be delivered in?

Common questions

How much does a phase change material simulation developer cost?

The posted budget is 12,500 to 37,500 INR. Quote against the scope you agree, including the inputs and the accuracy checks you will deliver.

Does this project need thermal and simulation skills?

Yes. The brief asks for transient heat transfer modelling, phase-change behaviour and a reusable model that can run many scenarios.

Is this project still open?

We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.

This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.

Before you apply

To apply for this job you need a free AutoBidPilot account. It takes about a minute:

  1. Create your account with your email, Google or GitHub.
  2. Verify your email. We send you a link; opening it brings you straight back to this job.
  3. Finish a short setup (your skills and pricing), then apply.
Create free account I already have an account

100 free credits when you connect your profile.