Network Multicast Fix Project for Speaker Discovery and UPS Shutdown
Network multicast fix project: a Wi-Fi speaker cannot be found by its app, which points to multicast or mDNS traffic being blocked on the router. This brief covers both fixes and how to bid.
- Open · checked 12 Nov 2026
- 🇬🇧 United Kingdom (budget currency)
- Technical Support
Is the budget fair? Tight if the client expects two fixes with full proof and documentation at this price. Looks workable if the job stays to multicast settings and one UPS shutdown setup.
What the client needs
- Examine the router's multicast and mDNS settings.
- Apply the correct multicast and IGMP settings.
- Prove the speaker stays visible after reboots.
- Set up a graceful UPS shutdown on power loss.
Skills the client asked for: Technical Support, Network Administration, Documentation, Network Security, Network Engineering, Ubiquiti, Network Monitoring, System Administration.
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
What the project involves
The client needs two tight-scoped fixes on a Ubiquiti Dream Machine.
Fix 1: speaker discovery
A Wi-Fi-only Sonos One and the client's phone are on the same SSID, yet the Sonos app cannot see the speaker. Multicast or mDNS traffic appears to be blocked or mis-routed inside the Dream Machine. The network should be examined, the correct multicast and IGMP settings applied, and proof given that the speaker reliably appears in the app and stays reachable after reboots.
Fix 2: UPS integration
A UPS is already cabled to the Dream Machine, but the shutdown script is not in place. The integration must be configured so that on power loss the Dream Machine shuts down gracefully, then comes back up cleanly when power returns.
Deliverables
- Multicast and mDNS settings adjusted and documented
- Speaker consistently visible in the app after multiple reboots and tests
- UPS monitoring service installed, with auto-shutdown and auto-recovery verified
- Clear notes of every change so the setup can be replicated
How to win this project
- Ask for the router model, firmware version and the list of devices before you change any setting.
- Plan a reboot test in advance, so you can prove discovery holds after a restart.
- Keep a short change log for every setting you touch, so the fix can be repeated or reversed.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- What are the router model, firmware version and Wi-Fi bands in use?
- Is the UPS connected by USB, and which shutdown method do you prefer?
- Should any other network settings stay unchanged?
Common questions
How much does a network multicast fix project cost?
The stated budget is £74–75 GBP for two fixes. Confirm whether the UPS work is included, since it changes the scope.
What skills does a network multicast fix project need?
The client lists network administration, network engineering, network security, network monitoring and system administration. Show past router or UPS configuration work.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.