Soap Dispenser Prototype Project with a Scent Release System
This soap dispenser prototype project asks for an existing product design to be built into a fully working prototype with an electronically controlled scent system. The brief covers the build scope and what a bid should prove.
- Open · checked 12 Nov 2026
- Translation
Is the budget fair? Looks workable for one prototype built from a finished design. Tight if the design needs major rework or the client expects several tested units at this price.
What the client needs
- Show experience building embedded prototypes with 3D-printed parts.
- Review the existing design before quoting the build.
- Wire up the microcontroller and the scent release.
- Test the working prototype and report the results.
Skills the client asked for: Translation, Microcontroller, Ghostwriting, Article Writing, German Translator, 3D Printing, Embedded Systems, Prototyping.
Where to aim your bid
The sweet spot sits about 40% of the way up the client's range, the same rule AutoBidPilot uses for its own price suggestions. Go higher when the scope is large or unclear; go lower only when you can show close, finished work. Check what you keep after fees with the bid price calculator.
Across the 3 Translation briefs we have written in EUR, the median budget is €140. We wrote 28 Translation briefs in the last 7 days.
Project overview
The client seeks an experienced freelancer, developer or engineering team to turn an existing product design into a fully functional prototype of an automatic soap dispenser with an integrated, electronically controlled scent release. The mechanical design and technical documents, including intended electronic components and their positions, already exist. This is explicitly not a full redevelopment. The contractor may be located worldwide, with Germany, Europe or Asia preferred.
Device features
- Oval plastic housing and a soap container of about 500 ml
- Sensor-controlled automatic dispensing
- A separate scent module in the lower housing with a replaceable cartridge
- A small fan to distribute scent, motion sensor to detect hand washing, time-delayed scent release and a lockout period to avoid constant or too frequent fan operation
- Battery operation, with wall mounting or freestanding use
Scope of work
- Review the CAD design and documents and the planned electronics, identify needed adjustments and agree them before manufacture
- Source all parts independently, preferring standard commercial components, including sensors, boards, fan, battery supply, cables and mechanical parts
- Manufacture the housing, preferably by 3D printing for the first prototype, and install and fix all components
- Build and integrate the electronics, program the sensor control and fan, implement timing and lockouts and check electrical functions
- Assemble the device and test the soap dispensing, scent release, sensor detection and battery operation, fixing any faults
Mandatory documentation and deliverables
A complete bill of materials is required with, for each part: full name, manufacturer, exact part number, supplier, direct product link, actual unit price, quantity and function. Alternative suppliers should be listed so parts can be reordered later.
- Two fully working, assembled prototypes
- The bill of materials with part numbers, sources and purchase prices
- Electronic schematic, plus PCB layout and production data if a custom board is used
- All newly created CAD and 3D-print files and the control software with source code
- Documentation of electronics and wiring, a short operating description and records of functional tests
Offer and applicant requirements
- Experience in mechatronics, electronics, microcontrollers, embedded firmware, 3D CAD and plastic housings, prototyping and component sourcing; battery-powered household devices are an advantage
- Reference projects should be provided
- A binding offer separating development labour, parts, housing and manufacture, assembly and testing, shipping to Germany and expected delivery time, and stating whether a fixed price is possible
- An NDA is signed before technical documents are shared
How to win this project
- Share a prototype you built with a microcontroller and 3D-printed parts, since the client needs working hardware.
- Ask for the existing design files and list anything you would need to redesign, so the quote stays accurate.
- State how you will test the scent release and the automatic dispensing before handover.
Questions to ask the client
A specific question in your first message shows you read the brief. Pick one or two:
- Which design files and drawings already exist for the mechanical parts?
- How many prototype units are needed?
- Are there any location or travel requirements for the build?
Common questions
How much does a soap dispenser prototype project cost?
The posted budget is €750–1,500 EUR. That may cover one prototype built from a clear design; several units or redesign work would need a higher quote.
What should a soap dispenser prototype project proposal include?
Photos of past prototypes, your microcontroller and 3D printing approach, and a test plan for the scent system.
Is this project still open?
We checked this project on 10 November 2026. Projects get awarded, so apply soon; we take a brief down when it closes.
This page is our own summary of a project posted online, written to help you decide and to write a better bid. Projects get awarded or closed, so apply soon; we take a brief down when it closes. No job or income is guaranteed.